Skip to content
-
Subscribe to our newsletter & never miss our best posts. Subscribe Now!
  • https://www.facebook.com/
  • https://twitter.com/
  • https://t.me/
  • https://www.instagram.com/
  • https://youtube.com/
Cloud Security Tips Cloud Security Tips

What is cloud security

Cloud Security Tips Cloud Security Tips

What is cloud security

  • Home
  • About us
  • Contact us
  • Home
  • About us
  • Contact us
Subscribe
Close

Search

Hooded figure behind a phone showing a warning icon and call buttons, representing a spoofing attack
Security Tips

What Is an ARP Table? How It Works, Commands, and Security Risks

By admin
November 20, 2026 9 Min Read
1

An ARP table is a list that maps IP addresses to MAC addresses on a local network. Every time your computer talks to another device on the same network, it checks its ARP table first. If the entry is there, it can send the data straight to the right hardware address. If it is not, it has to ask the network who owns that IP address. In this guide, you will learn what an ARP table is, how ARP works, how to view and manage the table on Windows, Linux, and Cisco devices, what each entry means, and how attackers abuse ARP, with practical security steps you can use today.

Table of Contents

Toggle
  • What Is an ARP Table?
  • How ARP Works, Step by Step
    • 1. Check the ARP Table
    • 2. Send an ARP Request
    • 3. Receive an ARP Reply
    • 4. Update the ARP Table
  • What Is in an ARP Table?
    • Dynamic vs. Static ARP Entries
    • Gratuitous ARP and Proxy ARP
  • How to View the ARP Table
    • Windows
    • Linux and macOS
    • Cisco Routers and Switches
  • ARP Table vs. Routing Table vs. MAC Address Table
  • ARP Table Example
  • ARP Security Risks
    • ARP Spoofing and Poisoning
    • ARP Cache Poisoning and Session Hijacking
    • Denial of Service
  • Best Practices to Protect the ARP Table
  • Common Mistakes to Avoid
  • Troubleshooting With the ARP Table
  • Frequently Asked Questions
    • What is in an ARP table?
    • What does ARP stand for?
    • How do I view my ARP table?
    • What is the difference between an ARP table and a routing table?
    • How do I clear the ARP table?
  • Conclusion

What Is an ARP Table?

An ARP table, also called an ARP cache, is a small database stored in memory on a computer, router, or switch. Each row pairs a Layer 3 address, an IPv4 address, with a Layer 2 address, a MAC address, and records how that mapping was learned and how long it will be kept.

ARP stands for Address Resolution Protocol. It exists because IP addresses and MAC addresses do different jobs. An IP address identifies a device logically and can change when it moves to another network. A MAC address identifies a network interface physically and is burned into the hardware. On a local network, Ethernet frames are delivered by MAC address, so a device must translate the destination IP address into a MAC address before it can send anything. The ARP table is where that translation is stored.

Without an ARP table, a device would have to broadcast an ARP request for every single packet, which would flood the network and slow everything down. The cache makes local communication fast and efficient.

How ARP Works, Step by Step

Imagine your computer, at 192.168.1.10, wants to send a packet to a printer at 192.168.1.25 on the same subnet.

1. Check the ARP Table

Your computer first looks in its own ARP table for 192.168.1.25. If it finds a matching MAC address, it builds an Ethernet frame addressed to that MAC address and sends the packet immediately.

2. Send an ARP Request

If there is no entry, your computer broadcasts an ARP request to every device on the local network, asking who has 192.168.1.25. The request contains the sender’s IP and MAC addresses.

3. Receive an ARP Reply

Only the device that owns 192.168.1.25 answers, with a unicast ARP reply containing its MAC address. All other devices ignore the request.

4. Update the ARP Table

Your computer stores the new IP-to-MAC mapping in its ARP table, then sends the original packet. The next time it talks to the printer, it can skip the request and use the cached entry, until the entry expires.

Entries do not last forever. Dynamic entries age out after a few minutes, typically 2 to 20 minutes depending on the operating system, so the table is refreshed regularly and stale mappings are removed.

What Is in an ARP Table?

Field What It Means Example
IP address The logical IPv4 address of the device 192.168.1.25
MAC address The physical hardware address of the interface aa:bb:cc:11:22:33
Interface Which network interface learned the entry Ethernet, Wi-Fi, eth0
Type How the entry was learned: dynamic or static dynamic
State On Linux, the reachability state of the neighbor REACHABLE, STALE, DELAY

Dynamic vs. Static ARP Entries

A dynamic entry is learned automatically through ARP requests and replies. It is temporary and expires after a timeout. Most entries in an ARP table are dynamic.

A static entry is added manually by an administrator and does not expire. Static entries are used for critical devices such as a default gateway, because they cannot be overwritten by a spoofed ARP reply as easily. The downside is that they must be updated by hand if a device’s network card is replaced.

Gratuitous ARP and Proxy ARP

A gratuitous ARP is an ARP announcement a device sends without being asked, usually when it starts up or its IP address changes. It tells other devices to update their tables and can also detect an IP address conflict.

Proxy ARP is when a router answers ARP requests on behalf of another device, usually a device on a different network. It was useful in older networks, but it can hide addressing mistakes and create security risks, so it is usually disabled today.

How to View the ARP Table

Windows

Open Command Prompt and run arp -a. You will see a list of interfaces, IP addresses, physical (MAC) addresses, and the type of each entry. To see entries for one interface only, use arp -a 192.168.1.10. To delete a single entry, use arp -d 192.168.1.25, and to clear the whole table, use arp -d * as an administrator. To add a static entry, use arp -s 192.168.1.1 aa-bb-cc-11-22-33.

Linux and macOS

On Linux, run ip neigh or ip neighbour show to see the neighbor table, which is the Linux name for the ARP table. Older systems use arp -a or arp -n. On macOS, arp -a works the same way as on Windows. To delete an entry on Linux, use ip neigh del 192.168.1.25 dev eth0. To add a static entry, use ip neigh add 192.168.1.25 lladdr aa:bb:cc:11:22:33 dev eth0 nud permanent.

Cisco Routers and Switches

On Cisco IOS, run show ip arp to see the ARP table, including the protocol, address, age, hardware address, type, and interface for each entry. Use show arp on some platforms. To clear an entry, use clear arp-cache or clear ip arp 192.168.1.25. To add a static entry, use arp 192.168.1.25 aabb.cc11.2233 arpa in global configuration mode.

ARP Table vs. Routing Table vs. MAC Address Table

These three tables are often confused, because they all help a device decide where to send traffic. The difference is the layer and the question each one answers.

Table Layer Question It Answers Maps
ARP table Layer 2 / 3 boundary What MAC address has this IP address? IP address to MAC address
Routing table Layer 3 Which interface and next hop reach this network? Destination network to next hop
MAC address table Layer 2 Which switch port is this MAC address on? MAC address to switch port

A network switch uses its MAC address table to forward frames inside a LAN. A router uses its routing table to choose the path between networks, and its ARP table to find the MAC address of the next hop on the local link. A host uses its ARP table for the same local step. Together, the three tables move a packet from one device to another, hop by hop.

ARP Table Example

A typical home network ARP table might look like this after a few minutes of use. The gateway is usually the first entry, followed by other devices that have been contacted recently.

Internet Address: 192.168.1.1, Physical Address: aa-bb-cc-00-11-22, Type: dynamic. Internet Address: 192.168.1.25, Physical Address: aa-bb-cc-11-22-33, Type: dynamic. Internet Address: 192.168.1.100, Physical Address: 11-22-33-44-55-66, Type: dynamic. Internet Address: 224.0.0.22, Physical Address: 01-00-5e-00-00-16, Type: static. The last entry is a multicast address, which is always present and is not a real device.

If a device has not been contacted recently, it will not appear in the table. That is normal. An empty or short ARP table on a quiet host does not mean the network is broken.

ARP Security Risks

ARP was designed in the early days of networking, when local networks were trusted. It has no authentication, and that makes it a target.

ARP Spoofing and Poisoning

In ARP spoofing, also called ARP poisoning, an attacker sends fake ARP replies that link the attacker’s MAC address to the IP address of the gateway or another victim. The victim’s ARP table is poisoned with the wrong mapping, so traffic that should go to the gateway goes to the attacker instead. The attacker can then intercept, modify, or drop the traffic. This is a classic man-in-the-middle attack, and a form of on-path attack.

ARP Cache Poisoning and Session Hijacking

Once traffic flows through the attacker, they can read unencrypted data, steal session cookies, and capture credentials. Even encrypted traffic can be disrupted or downgraded if the attacker can interfere with the connection setup.

Denial of Service

An attacker can also poison ARP tables with a nonexistent MAC address, so traffic is sent nowhere and the victim loses network access. This is a simple and effective denial-of-service attack on a local network.

Best Practices to Protect the ARP Table

Use Dynamic ARP Inspection (DAI) on managed switches. DAI checks ARP packets against a trusted database, usually built from DHCP snooping, and drops ARP replies that do not match. This is the single most effective defense against ARP spoofing on an enterprise network.

Use static ARP entries for critical devices such as the default gateway and important servers, especially on small networks without managed switches. Keep the list short and documented, so it can be updated when hardware changes.

Segment the network with VLANs, so an attacker on one segment cannot poison the ARP tables of devices on another segment. Use APIPA addresses only as a fallback, and investigate any device that is using a 169.254.x.x address unexpectedly, because it may indicate a DHCP or network problem.

Monitor ARP tables for changes. If the gateway’s MAC address changes suddenly, or two IP addresses share the same MAC address, investigate immediately. Network monitoring tools and intrusion detection systems can alert on gratuitous ARP storms and duplicate MAC addresses.

Use encryption everywhere. HTTPS, VPNs, and encrypted email mean that even if an attacker intercepts traffic, they cannot easily read it. Keep firmware and operating systems patched, and disable proxy ARP unless you have a specific reason to use it.

Common Mistakes to Avoid

First, do not assume an ARP entry is permanent. Dynamic entries expire, and a missing entry is usually normal. Second, do not confuse the ARP table with the routing table. If a device can reach local hosts but not the internet, the problem is more likely routing or DNS than ARP. Third, do not clear the ARP cache as a first step for every network problem. It is a useful troubleshooting step, but it will not fix a faulty cable, a wrong subnet mask, or a down gateway. Fourth, do not ignore duplicate IP address warnings. They often mean an ARP conflict, a misconfigured device, or an attacker on the network.

Troubleshooting With the ARP Table

If a device cannot reach one local host but can reach others, check the ARP table for that host’s IP address. If the entry is missing, try to ping the host and check again. If the entry shows the wrong MAC address, or the same MAC address for two different IP addresses, suspect ARP spoofing or an IP conflict. If the entry is incomplete, the device may be powered off, disconnected, or blocked by a firewall. Clearing the ARP cache with arp -d or ip neigh flush forces a fresh ARP request and can confirm whether the problem is a stale entry.

Frequently Asked Questions

What is in an ARP table?

An ARP table contains IP addresses, the MAC addresses that own them, the interface that learned each entry, and whether each entry is dynamic or static. On Linux, it also shows the reachability state of each neighbor.

What does ARP stand for?

ARP stands for Address Resolution Protocol. It is the protocol that resolves an IPv4 address to the MAC address of the device that owns it on the local network.

How do I view my ARP table?

On Windows and macOS, run arp -a in a terminal or Command Prompt. On Linux, run ip neigh. On a Cisco device, run show ip arp.

What is the difference between an ARP table and a routing table?

An ARP table maps IP addresses to MAC addresses on the local network. A routing table maps destination networks to the next hop and interface used to reach them. ARP works on one link; routing works across networks.

How do I clear the ARP table?

On Windows, run arp -d * as an administrator. On Linux, run ip neigh flush all. On Cisco IOS, run clear arp-cache. The table will rebuild itself as devices communicate again.

Conclusion

An ARP table is a small but essential part of every local network. It turns IP addresses into MAC addresses, so Ethernet frames reach the right device without a broadcast for every packet. Understanding how to read it, how to clear it, and how attackers poison it will help you troubleshoot faster and spot one of the oldest and most effective local network attacks. Check your ARP table the next time a device cannot be reached, and make Dynamic ARP Inspection and encryption part of your standard network defenses.

Author

admin

Follow Me
Other Articles
Magnifying glass inspecting red computer code for a hidden security flaw
Previous

What Is a Zero Day? Definition, Examples, and How to Protect Yourself

Digital brain with circuit patterns, illustrating AI governance policy and compliance
Next

What Is a DPIA? Data Protection Impact Assessment Explained

One Comment
  1. Netmask Cheat Sheet: CIDR and Subnet Masks Explained says:
    November 20, 2026 at 4:29 am

    […] address matches the device’s own network, the destination is local, and the device uses its ARP table to find the destination’s MAC address. If it does not match, the destination is remote, and […]

    Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Recent Posts

  • Compliance Risk Assessment: A Complete Guide for 2026
  • SX SFP Module: What It Is, How It Works, and When to Use It
  • Hotspot 2.0 (Wi-Fi Passpoint): What It Is and How It Works
  • Volume Boot Record (VBR): What It Is, How It Works, and How to Fix It
  • Can Website Owners See Who Visits Their Website? What They Can (and Cannot) See

Recent Comments

  1. Compliance Risk Assessment: A Complete Guide for 2026 on ISO 27001 Compliance: What It Is, How to Get Certified, and How to Stay Compliant
  2. SX SFP Module: What It Is, How It Works & When to Use It on Network Access Control: What It Is, How It Works, Types and Examples
  3. Hotspot 2.0 (Wi-Fi Passpoint): What It Is & How It Works on WIPS: What Is a Wireless Intrusion Prevention System?
  4. Volume Boot Record (VBR): What It Is & How to Fix It on Hypervisor: What It Is, Types, Security Risks and How to Harden It
  5. Can Website Owners See Who Visits? What They See & Can't See on California Consumer Privacy Act (CCPA): What It Is, Your Rights, and How to Comply in 2026

Archives

  • November 2026
  • October 2026
  • September 2026
  • August 2026
  • July 2026
  • June 2026
  • May 2026
  • February 2026

Categories

  • Blog
  • Business
  • Security Tips
  • Tech
  • Travel
  • Uncategorized
Copyright 2026 — Cloud Security Tips. All rights reserved. Blogsy WordPress Theme

Powered by CookieAdmin
Necessary cookies enable essential site features like secure log-ins and consent preference adjustments. They do not store personal data.
None
Functional cookies support features like content sharing on social media, collecting feedback, and enabling third-party tools.
None
Analytical cookies track visitor interactions, providing insights on metrics like visitor count, bounce rate, and traffic sources.
None
Advertisement cookies deliver personalized ads based on your previous visits and analyze the effectiveness of ad campaigns.
None
Unclassified cookies are cookies that we are in the process of classifying, together with the providers of individual cookies.
None
Powered by CookieAdmin